Showing 1–15 of 29 results

Show sidebar
Show 9 12 18 24
B&C Electronics BC 7335 Controller

B&C Electronics BC 7335 Controller

The controller has both differential and single inputs for analog current signals 0-20 mA or 4-20 mA. It also provides a 24 Vdc - 50 mA max. supply voltage to power directly "current loop" transmitters.
B&C Electronics BC 7635 Controller

B&C Electronics BC 7635 Controller

The controller has both differential and single inputs for analog current signals 0-20 mA or 4-20 mA. It also provides a 24 Vdc - 50 mA max. supply voltage to power directly "current loop" transmitters
B&C Electronics C 3645 Controller

B&C Electronics C 3645 Controller

The controller use 2-electrodes and 4-electrodes conductivity cells with K = 1.00 and NTC 10 K temperature sensors. If the termoresistance is connected the controller makes automatic temperature compensation with fixed 2 % / °C coefficient. Its modularity, small dimensions and ease of use make it suitable for measurements and adjustment of E. Conductivity at low cost.
B&C Electronics C 3655 Controller

B&C Electronics C 3655 Controller

The controller use the SI 315 and SI 315.1 electrodeless conducitivity cells with built-in RTD Pt100 temperature sensor.
B&C Electronics C 7615 Controller

B&C Electronics C 7615 Controller

The controller use 2-electrodes conductivity cells with K = 1.00 and provides three measuring ranges selectable on the cell inputs terminal blocks. Its robustness and ease of use make it suitable for measurements and adjustment of E. Conductivity at low cost.
B&C Electronics C 7685 Controller

B&C Electronics C 7685 Controller

The controller can be configured to use 2-electrodes conductivity cells, amplified 4-electrodes and amplified inductive cells. It provides manual and automatic temperature compensation, if an RTD Pt100 is connected. When the RTD is connected, the instruments provides the temperature reading.
B&C Electronics MC 6587 Controller

B&C Electronics MC 6587 Controller

Multi-channel controller for digital probes and transmitters, wall mounting, RS485-Modbus MC 6587 can control up to three B&C Electronics digital probes and transmitters. If necessary, the user can connect two or three devices of the same kind, so to have a double or triple validation.
B&C Electronics MC 7687 Controller

B&C Electronics MC 7687 Controller

Multi-channel controller for digital probes and transmitters, RS485-Modbus MC 6587 can control up to three B&C Electronics digital probes and transmitters. If necessary, the user can connect two or three devices of the same kind, so to have a double or triple validation.
B&C Electronics MV 3647 Controller

B&C Electronics MV 3647 Controller

The controller uses ORP sensors. Its modularity, small dimensions and ease of use make it suitable for measurements and adjustment of ORP at low cost.
B&C Electronics MV 545.2 Controller

B&C Electronics MV 545.2 Controller

The controller can be connected to a polarogaphic. The connection may also be done though microtransmitter 080610.2. It provides manual and automatic temperature compensation. The instruments provides also the temperature reading
Waircom Series EPR Pressure proportional valve

Waircom Series EPR Pressure proportional valve

Pressure proportional valves G1/8" - G1/4" - G1/2"
Waircom Series EZ Filter reducer with lubricator

Waircom Series EZ Filter reducer with lubricator

Filter+ Reducer + Lubricator G3/8" - G1/2" - G1"
Waircom Series EZAP Soft-start valve

Waircom Series EZAP Soft-start valve

Soft-start valve G3/8" - G1/2" - G1"
Waircom Series EZF Filter

Waircom Series EZF Filter

Filter G3/8" - G1/2" - G1"
Waircom Series EZL Lubricator

Waircom Series EZL Lubricator

Lubricator G3/8" - G1/2" - G1"