Driven Membrane Solenoid Valves – Direct Action
The driven membrane Solenoid Valves are suitable to be used were the service pressure may be zero. This includes gravity filling installations of tanks and other applications with minimum pressure. Shut-off valves for Water, Air, Oil and neutral or slightly corrosive Fluids.
General Information:
Driven membrane solenoid valve
Function 2-Way NC
Protection IP 65 with connector
Standard Voltage 24 VDC, 24V,110V,230V AC
Options:
Special Voltage
Insulation Class Coils H (180 °C)
Electrical Connector IP 65
Electrical Connector IP 65 c/w LED and Varistor
Waterproof Coils IP 67, Atex II 2 GD
NPT Threaded Fittings
Evian 221S Solenoid valve
Stainless Steel 2/2 NC Threaded G3/8″-1″
Description
Additional information
| Značka |
|---|
ZÍSKEJTE CENU
Chcete-li obdržet nabídku, zašlete svou žádost na adresu info@prumyslovy-distributor.cz a uveďte požadované pozice a podrobnosti o společnosti.
Specification
Valve Body: Stainless Steel CF3M (A316 SS)
Latch Disc: FKM-EPDM
Pass-through Diameter: From 15 to 24 mm
Rate Value Kvs: From 40 to 105 l/min.
Service Pressure: 0 - 10 bar (depending on the type of coil)
Max. Pressure of Use: 50 bar
oil Insulation Class: class F (155 °C)
Insert: 100 % continuous insert
Threaded Fittings: Bevel Threaded G 3/8" - 1"
Viscosity of the Fluid: 76 Cst. max.
Temperatures of the Fluid: From -10 °C to + 140 °C depending on the type of vds PDF)
Ambient Temperature: From - 10 °C to + 50 °C
